4993
Oil level alarm - only 1 probe possible
The alarm is adapted for a new site where electricity supply is easily accessible, to have an economic and effective installation.
This alarm system detects the level of hydrocarbons in the separator compartment before clogging.
The alarm is suitable for new sites where the power supply is easily accessible, making installation efficient and economical.
The unit continuously checks the presence of hydrocarbons by measuring conductivity. When the probe is in water, the LED is lit green. When the high level of oil is detected, the alarm sounds and the beacon lights up (option). To mute the alarm, and turn off the flashing light, press the button. The LED will remain red until the next water detection.
- Ambiante temperature : - 20°C to + 50°C
- 1 entrance sensor
- Supply voltage : 230 VAC +-10%
- Box protection : IP65
- Inherent security : [EX ia] IIC (-20°C
- ATEX certicifaction : Baseefa08ATEX0110X
- 5 meter cable
- Outgoing transmitter : 11.2V DC, 100 mA maximum
- Power rating : without alarm : 2.5W / with alarm : 4.8W
- Fusible : FS1 : T250mA H250V and FS2 : fusible 0242.050UAT1 , 50mA 250V
- 1 entrance sensor
- Supply voltage : 230 VAC +-10%
- Box protection : IP65
- Inherent security : [EX ia] IIC (-20°C
- ATEX certicifaction : Baseefa08ATEX0110X
- 5 meter cable
- Outgoing transmitter : 11.2V DC, 100 mA maximum
- Power rating : without alarm : 2.5W / with alarm : 4.8W
- Fusible : FS1 : T250mA H250V and FS2 : fusible 0242.050UAT1 , 50mA 250V
See sheet :
- P083 about oil separator in steel
- P084 aboit oil separator in polyethylene
A user guide is delivered with the alarm.
The maximal length of sensor able is 200 m.
All electrical connection must be realized by a professional, in option an assistance must be proposed.
- P083 about oil separator in steel
- P084 aboit oil separator in polyethylene
A user guide is delivered with the alarm.
The maximal length of sensor able is 200 m.
All electrical connection must be realized by a professional, in option an assistance must be proposed.
The sensor must be exposed in difficult environments. Its recommended to inspect and clean them regulary.
All parts of the control unit can't be maintained by the user. For any repair, consult us.
All parts of the control unit can't be maintained by the user. For any repair, consult us.
Oil detection alarm allows to satisfy the requierements of EN858 norm which imposes his using for the use of oil separator.