6327
Polyethylene "non-food" water storage tank from 10 to 20m3 - to be buried

Inground storage tank made of high-density non-food grade black reinforced polyethylene or for density 1 runoff. This tank has been dimensioned and manufactured to withstand land pressure by being completely empty and even in a hydromorphic ground with a height of water up to 1 meter from the bottom of the tank. In the case where the water height is higher, we offer polyester tanks (see technical sheet 6323)
PDF Technical sheet
HANDLING AND INSTALLATION
Refer to the PHPE installation manual before handling and installing the tank.

EARTH
Attention: the altimetric installation of the tank must be calculated in such a way that the height of the underground water table does not exceed 1 meter with respect to the bottom of the tank.

It is imperative to use the CA3/6394/10T belts, when they are fastened around the tank and on the irons, they should not be subjected to excessive tension in order to maintain the cylindrical shape of the tank.
The tank does not require any particular maintenance.
It will simply have to be drained and cleaned periodically. It is recommended to check in the piezometer that the groundwater level does not exceed 1 meter in relation to the bottom of the tank.
A biennial guarantee is granted.
The winery benefits from a 20-year anti-corrosion guarantee

Options

  Description
RH2/6030 REHAUSSE H300 INH6/8 SCORPIONNE
CA3/6394/10T CEINTURE ANCRAGE 10T + WINCH