5150
EASYLIFT 100L PE lift station in PE - 1 water pump on tripod

This station is used for the recovery of domestic wastewater including toilet water. It is also suitable for rainwater.

Domestic lifting gear consisting of: 
1 cylindrical polyethylene (PE) tank, usable volume 100 litres
1 screw-on PE cover resting on an O-ring
1 PVC female input Ø 100
1 ventilation Ø 50 ext.
1 ball check valve PVC DN 50 
1 outlet outlet Ø 63 outside Ø 63
1 cable gland 
1 pump for waste water on tripod with built-in float switch and 10 ml of cable, vortex impeller with a maximum of 50 mm solid body passage.
1 package consisting of 1 cuff, 1 gasket and 1 bell saw to make an additional entry according to the 5 center pieces available and a plug to block the horizontal entry if a vertical entry is made.

PDF Technical sheet
This station is used for the recovery of polluted water including WC waters.
Operation is automatic after connection.
The tank receives the water to be pumped back. It fills up, the float switch gives the pump start pulse, the water level goes down and when the tank is almost empty, the float gives the pump stop pulse, and so on.

N. B: warn users to prohibit the disposal of wipes in the waste water network connected to the station.
Refer to the PRELPE manual before handling and installation of the lifting station.
The pump is ready to be plugged into a 220V + earth socket.
It must be protected upstream by a 30 mA differential switch.
Periodically check that the pump orifice is not partially blocked. 
Clean the tank periodically. 
Clean the float switch monthly.

A maintenance contract of at least 2 visits per year with a specialized company must be signed as soon as the equipment is put into service.
The pump is guaranteed for 1 year from the date of invoice.
The warranty is subject to installation and maintenance conditions.

Options

  Description
RH502 -
AE1612 ALARME DE NIVEAU HAUT SONORE 230V AV FLOTTEUR 10ML CABLE