5154
VARYLIFT Ø600 PE lift station Ø600 - 1 water pump on tripod

This station is used for domestic wastewater including toilet water up to 15 p.e. It is also suitable for rainwater.

Lift for domestic use composed of :
- 1 cylindrical tank Ø 630mm inside in polyethylene (PE), minimum useful volume of 190L
- 1 tank bottom resistant to the water table
- 1 screw-on PE cover with O-ring seal
- 1 Forsheda gasket and a Ø100 hole saw to drill the inlet on site
- 1 cable passage Ø 63 ext
- 1 PVC pressure outlet Ø 63 ext
- 1 PVC F/F DN50 ball check valve and 1 DN 50 valve
- 1 ventilation Ø 63 ext.
- 1 tripod pump for sewage with 10 ml of cable, maximum 50 mm solid body passage
PDF Technical sheet
This station is used for the recovery of polluted water including WC waters.
Operation is automatic after connection.
The tank receives the water to be pumped back. It fills up, the float switch gives the pump start pulse, the water level goes down and when the tank is almost empty, the float gives the pump stop pulse, and so on.

N. B: inform users to prohibit wipes from being disposed of in the waste water network connected to the station.
Refer to the PRELPE manual before handling and fitting the lifting station.
The pump is ready to be connected to a 220 Mono + Earth socket. It must be protected upstream by a 30 mA differential switch.
Periodically check that the pump orifice is not partially blocked. 
Clean the tank periodically. 
Clean the float switch monthly.

A maintenance contract of at least 2 visits per year with a specialized company must be signed as soon as the equipment is put into service.
The pump is guaranteed for 1 year from the date of invoice.
The warranty is subject to installation and maintenance conditions.

Options

  Description
RH502 -
AE1611 ALARME DE NIVEAU HAUT SONORE 230V AV FLOTTEUR 10ML CABLE
RH6949 REHAUSSE COULISSANTE D640/D690