5160
VARYLIFT lifting station Ø 1300 made of PE - 2 water pumps loaded on base plate

This station is used for the collection of domestic waste water including toilet water up to 200 EH. It is also suitable for rainwater.

Domestic lifting station equipped with:
1 polyethylene tank with polyester padlockable lid, min. usable volume 1310L
1 ground water-resistant tank bottom with integrated 100 mm concrete base plate
1 PVC male inlet Ø200, waterproof with window seal (factory drilled) and a flex-seal connector supplied
1 PVC outlet port Ø63 ext.
1 basket 304L stainless steel screen with air gap 39mm
2 single-phase pumps for wastewater, maximum 50mm solid body passage
2 guide bars in stainless steel 304L
2 cast iron seat legs
2 ball check valves PVC F/F and valves DN 50
1 support for stem (optional)
1 cable entry Ø100 ext.
1 anti-fall guard with independent bars (optional)
1 ventilation PVC male Ø100 ext.
1 control cabinet
PVC pressure pipes
level controllers
PDF Technical sheet
Wastewater or stormwater collection in all cases where effluents arrive lower than the point where they are to be discharged. 

Post intended to be buried outside a building allowing great accessibility for maintenance.
When the effluent enters the substation, the water level gradually rises and lifts the No. 1 level regulator, which informs the electrical cabinet of the possibility of starting one of the pumps. As soon as the water level raises regulator No. 2, a pump is switched on. When the water level drops back down and lowers regulator 1, the pump stops.
When the water level rises and controller No. 2 gives the start up information, the second pump is activated because there is alternating operation of the pumps. If the water level continues to rise after a pump has been switched on, it reaches controller No. 3, which activates the second pump.
In this case, both pumps operate in parallel until the water level drops to controller 1.

N. B: inform users to prohibit wipes from being disposed of in the waste water network connected to the station.
Refer to the PRELPE manual before handling and fitting the lifting station.
Note: the adjustment of the level controllers depends on the tidal volume of the pumps and will be carried out on the day of commissioning.
Regular checks to be carried out:
On pumps: oil level, tightening of the supply cable gland, motor insulation.
On the cabinet: fuses, terminal block clamping.
On level regulators: clean them if they are covered with grease or debris, check the contacts. 
Empty the basket regularly.

We remind users of our workstations of the obligation to sign a maintenance contract with a specialist company as soon as they start up. The guarantee of our devices is subject to this condition.
The pump is guaranteed for 1 year from the date of invoice. The warranty is subject to installation and maintenance conditions.

Options

  Description
CARI157 SUPPORT POTENCE CULBUTEAU
KREL4-089-15 POTENCE HAACON 150 KG CODE 209847
REL4-2-076-130 GRILLE ANTI CHUTE D.1300 A BARREAUX INDEPENDANTS
REL4/406-3 ARMOIRE EXTERIEURE (DOUBLE ENVELOPPE) 530x430x200mm
REL4/408-3 ARMOIRE EXTERIEURE (DBLE ENVELOPPE) + SOCLE EN PE HT 360mm