5455
Visimop II Ø600 monobloc 3 multi-diameter inputs for PVC Ø125 / 160/200 and 1 output 160/200

The VISIMOP Monobloc 5455, in diameter 600 with 3 inputs - 1 output, made of polyethylene is an inspection or connection box. It is designed for free-flow networks, in PVC diameters 160 and 200 with possibility to drill entries in diameters 125, 160 and 200.

Its resistance and ease of implementation allow it to meet site requirements, regardless of access difficulties.

Optionally, the look can be equipped with accessories such as:
- 400KN prefabricated concrete load distributor, ref. RCB 602-20. and RCB602-15
- Polyethylene adapter, height 100 mm,
ref. AHV610.
- JVH connection joint for entry quilting.
- Rubber seal, diameter 630, ref. AD660-0630, for sealing between the sight glass and the load distributor.
PDF Technical sheet
In accordance with issue 70 and developed in partnership with public works professionals and contractors, he presents:
- A perfect seal.
- Resistance to the water table (height 2 m) compared to the cunette.
- A guarantee against corrosion.
- An ease of implementation.
- A hydraulic profile (slope at 2%).
- No retention in materials.
- A cunette with 5 connection possibilities.
From the ground plane you provided us, a tracking was done on each piece and on the ground plane.
Check the connection diameter and the orientation of your pipes.
Then proceed to the cutting of the chosen location with the hole saw adapted to the appropriate diameter.
Place the corresponding branch gasket.
Adjust the bottom of the excavation and then place the eye. Connect the inlet and outlet pipe. Set up the embankment by compacting in successive layers.
Position the gasket between the manhole and the load balancer, if it is used.
Place the load distributor with the cast iron or the polyethylene tear-off lid, as appropriate.
In case of presence of water table, consult our Design Office.
Thanks to the high-density polyethylene quality, VISIMOP manholes do not require special maintenance.
Visimop is guaranteed for 15 years against corrosion.

Options

  Description
JVH200 -
JVH125 -
RCB602-20 REPART BETON D.1200 VISI 600-800-1000S
AHV612 ADAPTATEUR HAUTEUR VISIMOP HT150
JVH160 JOINT VISIMOP HUBLOT PVC DN160
AD653-125 JOINT F910 /PARASITE PVC D125
RED400-15 REGARD DRAINAGE D.400 H.1,50
RH400-05 REHAUSSE POUR RED400-15 HT500
AD653-160 JOINT F910 POUR PVC D160
AD653-200 JOINT F910 POUR PVC D200
AD666-0630 JOINT ETANCHEITE TETE REGARD
AD692-125 SCIE CLOCHE/PARASITE AD653-125
AD692-160 SCIE CLOCHE/PARASITE AD653-160
AD692-200 SCIE CLOCHE/PARASITE AD653-200
AD699-250 SCIE CLOCHE POUR JOINT JVH250
RCB602-15 REPART BETON D.1200 VISI 600-800-1000S ALLEGE
CV2/570 COUVERCLE PE ETANCHE POUR SOUS TAMPON VISIMOP