5470
VISIMOP II Ø800 monobloc 3 multidiameter inputs for PVC Ø125/160/200/250/315 and 1 output Ø250/315

The VISIMOP Monobloc 5470D16PV, diameter 800 with 3 inlets - 1 outlet, in polyethylene is a manhole with access for cleaning and inspection, occasionally visitable by a person equipped with a harness. It is designed for free-flowing PVC networks in diameters 250 and 315, with the possibility of drilling inlets in diameters 125, 160, 200, 250 and 315.
Its strength and ease of installation enable it to meet the requirements of the site, whatever the difficulties of access.

As an option, the manhole can be equipped with accessories such as
- 400 KN prefabricated concrete load distributor, ref. RCB 602-20.
- Polyethylene adapter, height 100 mm, ref. AHV612.
- JVH connection joint for inlet tapping.
- Rubber gasket, diameter 630, ref. AD666-0630, for sealing between the manhole head and the load distributor.
PDF Technical sheet
In accordance with the booklet 70 and developed in partnership with public works professionals and contractors, it presents: 
A perfect seal. 
Resistance to ground water (height 2 m) in relation to the bezel. 
A guarantee against corrosion. 
Easy implementation. 
Hydraulic profile (slope 2%). 
No material retention. 
One bezel with 3 connection options.
Refer to data sheet 5496
Based on the ground plan that you provided us, a marking was made on each part and on the ground plan. 
Check the connection diameter and orientation of your pipes. 
Then cut the selected location with the appropriate hole saw to the appropriate diameter. 
Insert the corresponding connection gasket. 
Adjust the bottom of the excavation and then place the manhole. Connect the inlet and outlet pipe. Place the backfill by compacting in successive layers. 
Position the gasket between the manhole head and the load distributor, if used. 
Place the load distributor with cast iron or polyethylene waterproof cover, as appropriate. 
In case of ground water table presence, consult our Design Office. 
Thanks to the high-density polyethylene quality, VISIMOP manholes do not require any special maintenance.
Visimop is guaranteed 15 years against corrosion.

Options

  Description
JVH200 -
AHV612 ADAPTATEUR HAUTEUR VISIMOP HT150
RCB602-20 REPART BETON D.1200 VISI 600-800-1000S
JVH315 -
JVH160 JOINT VISIMOP HUBLOT PVC DN160
JVH125 -
AD653-125 JOINT F910 /PARASITE PVC D125
RED400-15 REGARD DRAINAGE D.400 H.1,50
RH400-05 REHAUSSE POUR RED400-15 HT500
AD653-160 JOINT F910 POUR PVC D160
AD653-200 JOINT F910 POUR PVC D200
AD666-0630 JOINT ETANCHEITE TETE REGARD
JVH250 JOINT VISIMOP HUBLOT PVC DN250
AD699-250 SCIE CLOCHE POUR JOINT JVH250
RCB602-15 REPART BETON D.1200 VISI 600-800-1000S ALLEGE
AH147-26 Echelle pour visimop II -26 et -27
AH147-15 ECHELLE POUR VISIMOP II -15 et -17
AH147-18 ECHELLE POUR VISIMOP II -18 & -20
AH147-21 ECHELLE POUR VISIMOP II -21 et 23
AH147-24 Echelle pour Visimop II -24 et -26
AH147-29 Echelle pour Visimop II -29 et -30
AH147-32 Echelle pour Visimop II -32 et -33
AH147-35 Echelle pour Visimop II -35 et -36
AH147-38 Echelle pour Visimop II -38 et -39
KIT147-2ECH ECHELONS POUR VISIMOP II -12 et -14
AH147-41 Echelle pour Visimop II -41 et -42
CV2/570 COUVERCLE PE ETANCHE POUR SOUS TAMPON VISIMOP