A starch separator is an apparatus for folding the foams and storing any solids.
A starch foam spraying system is installed above the arrival of effluents from the potato peeler.
The control of the spray system must be controlled by the peeler.
6626
Starch separator from 1 to 5l / s polyethylene - buried or above-ground laying
Regarding small communities and professional facilities, collective kitchens, restaurants, the obligation to install starch separators results from the standard departmental health regulations and the public health code.
For equipment to be buried in a water table or a hydro-morphic area, select an appliance from data sheet 6636.
The apparatus will have to be buried out of ground in sheet or out of ground hydromorph or it will be able to be posed above ground.
Buried installation:
In the case of vehicles passing over or rolling overload or backfill height greater than 400 mm above the apparatus, a reinforced concrete slab must be cast, resting on the undisturbed ground, so that that the separator does not directly suffer the charges.
Respect the recommendations of the installation sheet P045
Laying in elevation:
The unit will be installed level on a perfectly flat surface and read all over the area of the unit.
Ventilation: see manual C010.
Remote extraction DN80 is possible by controlling option OD4-BBTN ....
The installer must supply and install a pressure PVC suction pipe to be connected to the outlet of the appliance and must place the firefighter fitting supplied with the option at the curb.
The separator should be inspected, drained and cleaned regularly, attention is drawn to the need to comply with national or local regulations regarding the disposal of waste.
The frequency of inspections, emptying and cleaning should be determined according to the grease and sludge storage capacity of the separator and operational experience. Unless otherwise specified, the separator must be emptied, cleaned and filled with fresh water at least once a month and preferably every 15 days (EN 1825-2).